Test Then Filter

What does my water test mean? Free results checker

By Test Then Filter editorial team · Last reviewed · 14 sources

Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.

How to use it: copy the numbers from your lab report into any of the boxes below, choose the unit your lab used, and press Check my results. Leave anything you didn't test blank. The checker compares each value with the matching U.S. EPA drinking water value, explains what kind of value it is, links the official source, and suggests the next step and guide. It runs entirely in your browser; nothing is sent anywhere.

Bacteria
Health-based limits
mg/L as nitrogen
mg/L
mg/L
µg/L
ppt (ng/L)
ppt (ng/L)
Taste, staining and scale
mg/L
pH units
mg/L
mg/L
mg/L

Reference values the checker uses

Federal values are written for public water systems. Private wells are not regulated under the Safe Drinking Water Act,[3] but these are the standard reference points for reading any drinking water test.

EPA values used by the checker (and their type)
TestValueTypeSource
Total coliform, including E. coliZero (goal)MCLG (health goal)[4]
Nitrate10 mg/L as nitrogen (= 45 mg/L as nitrate)MCL[4][5]
Nitrite1 mg/L as nitrogenMCL[4]
Arsenic0.010 mg/L (10 ppb)MCL[4][6]
LeadZero (goal); action level 0.015 mg/L, revised to 0.010 mg/L from Nov. 1, 2027MCLG; treatment technique action level for water systems[4][7]
Copper1.3 mg/L action level; 1.0 mg/L secondaryAction level; SMCL[4][1]
Fluoride4.0 mg/L; 2.0 mg/L secondaryMCL; SMCL[4][1]
Uranium30 µg/LMCL[4]
PFOA, PFOS4.0 ppt each (goal: zero)MCL finalized April 2024; changes proposed May 18, 2026[8]
Manganese0.05 mg/L secondary; 0.3 mg/L lifetime health advisorySMCL; health advisory (non-enforceable)[1][9][10]
Iron0.3 mg/LSMCL[1]
pH6.5 to 8.5SMCL[1]
Total dissolved solids500 mg/LSMCL[1]
Sulfate; chloride250 mg/L eachSMCL[1]
HardnessNo EPA limit; USGS classes: 0–60 mg/L soft, 61–120 moderately hard, 121–180 hard, over 180 very hardClassification only[11]

PFAS status: EPA finalized limits for six PFAS in April 2024. On May 18, 2026, EPA proposed two rules: one keeps the PFOA and PFOS limits while letting water systems request two more years (to 2031) to comply; the other would rescind the limits for PFHxS, PFNA, HFPO-DA (GenX) and the hazard-index mixture.[8] Because of that, the checker covers only PFOA and PFOS. Check EPA's page for the current status.

What the result types mean

Hardness converter

Penn State Extension says one grain per gallon equals approximately 17 mg/L (ppm) of calcium carbonate.[12] Our Hard water: test your hardness, then decide if you need a softener guide covers softener sizing.

Next steps after you check

  1. Confirm surprises with a retest at a state-certified laboratory. EPA lists each state's laboratory certification program.[13] Our state testing pages list official programs.
  2. Read the guide for each flagged result: coliform bacteria, nitrate, iron and manganese, hard water, or the full How to read your water test results guide.
  3. Match treatment to the result, and make sure any product is certified for the specific contaminant. NSF says certification to one standard does not mean a system reduces all contaminants.[14]
  4. Keep testing. CDC recommends testing a private well at least once a year for total coliform, nitrate, total dissolved solids and pH.[2]

Frequently asked questions

Does this tool tell me if my water is safe to drink?

No. It compares the numbers you enter with EPA reference values and points you to sources and next steps. It cannot account for things you did not test, sampling errors, or your household's health needs. For any result over a health-based value, contact your local or state health department.

Is my data sent anywhere?

No. The checker runs entirely in your web browser. Nothing you type is sent to us or stored.

My lab reports nitrate as NO3, not as nitrogen. Which do I enter?

Choose the unit your lab used. EPA's limit is 10 mg/L measured as nitrogen; Penn State Extension notes that is equivalent to 45 mg/L as nitrate, and the checker converts for you.

Do EPA limits apply to private wells?

Not legally. EPA says private wells are not regulated under the Safe Drinking Water Act, but the federal limits are the usual reference points for reading a private well test.

What does a less-than sign (such as <0.001) on my report mean?

It means the lab did not detect the substance above its reporting limit. You can type the value with the less-than sign and the checker will treat it as not detected.

Sources

  1. Secondary Drinking Water Standards: Guidance for Nuisance Chemicals — U.S. EPA (accessed November 19, 2026)
  2. Guidelines for Testing Well Water — U.S. CDC (accessed November 19, 2026)
  3. Private Drinking Water Wells — U.S. EPA (accessed November 18, 2026)
  4. National Primary Drinking Water Regulations — U.S. EPA (accessed November 19, 2026)
  5. Nitrates in Drinking Water — Penn State Extension (accessed November 18, 2026)
  6. Chemical Contaminant Rules (arsenic standard) — U.S. EPA (accessed November 19, 2026)
  7. Basic Information about Lead in Drinking Water — U.S. EPA (accessed November 19, 2026)
  8. Per- and Polyfluoroalkyl Substances (PFAS): Final PFAS National Primary Drinking Water Regulation — U.S. EPA (accessed November 19, 2026)
  9. Drinking Water Health Advisory for Manganese (PDF) — U.S. EPA (accessed November 19, 2026)
  10. 2018 Edition of the Drinking Water Standards and Health Advisories Tables (PDF) — U.S. EPA (accessed November 19, 2026)
  11. Hardness of Water — U.S. Geological Survey Water Science School (accessed November 18, 2026)
  12. Water Softening — Penn State Extension (accessed November 18, 2026)
  13. Contact Information for Certification Programs and Certified Laboratories for Drinking Water — U.S. EPA (accessed November 19, 2026)
  14. NSF Standards for Water Treatment Systems — NSF (accessed November 19, 2026)