Test Then Filter

About Test Then Filter

Test Then Filter is an independent, reader-supported guide to home water testing and treatment for people on private wells and city (public) water. Our method is in the name: find out what is in your water first, then match the treatment to the result. Guides are written and maintained by the Test Then Filter editorial team.

Our mission

Most people start shopping for a water filter after they notice something: an orange stain in the toilet, a rotten-egg smell, scale on the kettle, or a news story about a contaminant. The problem is that no single home system treats everything. NSF, which writes voluntary standards for home treatment systems, says certification to one of its standards does not mean a system will reduce all possible contaminants, and that you should check it is certified for the contaminants that concern you.[1] A filter bought on a guess can cost a lot and still miss the actual problem.

Our goal is to make the safer, cheaper order of operations easy to follow:

  1. Test with a certified laboratory, starting with the basic tests public health agencies recommend.
  2. Read the results against the official reference values, in plain language.
  3. Match the treatment type to the contaminant and its measured level, using what extension services and agencies say works.
  4. Retest to confirm the treatment is doing its job.

For private wells this matters even more. EPA notes that private well water is not regulated under the federal Safe Drinking Water Act, and testing is the owner's responsibility.[2] CDC and EPA both recommend testing a private well at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH.[3][4]

Who we are and what we are not

Test Then Filter is a small independent publication. We publish under the shared byline "Test Then Filter editorial team" rather than individual names. We want to be clear about what that means:

We use software tools, including AI writing and research assistants, to help gather sources and draft pages. Tools do not decide what we publish: every figure, limit and recommendation on a page has to match the text of the source it cites before it goes live, and anything we cannot verify is left out.

Our editorial approach

Every guide follows the same rules. The full detail is on our methodology page; the short version:

How we choose sources

We rank sources by how close they are to the authority that sets or studies the number:

  1. Federal agencies: U.S. EPA for drinking water standards (maximum contaminant levels, secondary standards and health advisories), CDC for well-testing guidance and health context, and USGS for water science.[7][8][9]
  2. State agencies: state health and environmental departments, which set state rules, certify laboratories and often run testing programs. EPA maintains a directory of state laboratory certification programs.[10]
  3. University extension services: land-grant university extension programs, such as Penn State Extension, publish practical guidance on well testing and home treatment.[11]
  4. Standards bodies: NSF/ANSI standard descriptions, so you can check what a certification actually covers.[1]

When credible sources disagree, for example on the level at which one treatment method stops being practical, we show both figures and name each source rather than picking one silently. We do not use manufacturer marketing as a source for health or performance claims.

Review and corrections

Before a page is published, each number is checked against the cited source text, every internal and source link is checked, and pages that touch on health carry a "not medical advice" note. We periodically re-check older pages against their sources and update the "last reviewed" date when we do.

If something is wrong, we fix it and say so. Our corrections log lists every factual correction with the date and what changed. You can report an error, an outdated limit or a broken link through our contact page.

How the site is funded

Test Then Filter may earn commissions from some links in the future, at no extra cost to you. Commissions never decide which treatment type we point to for a given result; that comes from the cited sources. We do not accept payment for coverage and do not publish paid reviews. Read our affiliate disclosure for details, and our privacy policy for how the site handles data.

Where to start

Sources

  1. NSF Standards for Water Treatment Systems — NSF (accessed November 19, 2026)
  2. Private Drinking Water Wells — U.S. EPA (accessed November 18, 2026)
  3. Guidelines for Testing Well Water — U.S. CDC (accessed November 19, 2026)
  4. Protect Your Home's Water — U.S. EPA (accessed November 19, 2026)
  5. Iron and Manganese in Private Water Systems — Penn State Extension (accessed November 18, 2026)
  6. Per- and Polyfluoroalkyl Substances (PFAS): Final PFAS National Primary Drinking Water Regulation — U.S. EPA (accessed November 19, 2026)
  7. National Primary Drinking Water Regulations — U.S. EPA (accessed November 19, 2026)
  8. Secondary Drinking Water Standards: Guidance for Nuisance Chemicals — U.S. EPA (accessed November 19, 2026)
  9. Hardness of Water — U.S. Geological Survey Water Science School (accessed November 18, 2026)
  10. Contact Information for Certification Programs and Certified Laboratories for Drinking Water — U.S. EPA (accessed November 19, 2026)
  11. Water Softening — Penn State Extension (accessed November 18, 2026)