Test your water first. Then choose the filter.
Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.
The short version: a filter can only fix a problem it is designed for. Find out what is actually in your water with a certified lab test, then match the treatment type to the contaminant and its level. Guessing first is how people end up with an expensive system that does not solve the problem.
Why test first?
No single home system removes everything. NSF, which publishes voluntary standards for home water treatment systems, says certification to one of its standards "does not mean that a filter, purifier or treatment system will reduce all possible contaminants," and that you should check a system is certified for the contaminants that concern you.[1] Iron, hardness, bacteria and nitrate each need a different kind of treatment, and the right size or type often depends on the measured level. For example, Penn State Extension notes the iron concentration "will determine the most practical and economical water treatment options."[2]
Step 1: Which water do you have?
- Private well
You are responsible for testing. EPA says private well water quality is not regulated under the federal Safe Drinking Water Act, nor by most states.[3] CDC and EPA both recommend testing at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH.[4][5] - City (public) water
Your utility already tests and publishes results in an annual Consumer Confidence Report, which you can look up through EPA.[6] Start there, then test at your own tap for issues that start in your home's plumbing, such as lead (see lead in drinking water).[5]
Step 2: Start from the symptom
EPA publishes a chart that links common signs and nearby activities to what you should test for.[5] A shortened version:
| What you notice | Test for | Our guide |
|---|---|---|
| Orange, brown or black stains on fixtures or laundry | Iron, copper, manganese | Iron & manganese |
| Scaly white deposits; soap won't lather | Hardness | Hard water |
| Recurring stomach or intestinal illness | Coliform bacteria | Coliform bacteria |
| Intensive farming nearby | Nitrate, nitrite, pesticides, coliform bacteria | Nitrate |
| Objectionable taste or smell (such as rotten egg) | Hydrogen sulfide, corrosion, metals | Rotten egg smell |
| Lead plumbing or service lines | pH, lead, copper | Lead in drinking water |
| Corrosion of pipes or plumbing | Corrosion, pH, lead | Lead in drinking water |
| Salty taste; seawater or heavily salted road nearby | Chloride, total dissolved solids, sodium | Reading results |
| Fuel odor; near a gas station or buried fuel tank | Volatile organic compounds | Ask your health department |
An odorless, clear glass of water is not proof it is safe. EPA notes that "odor-free water is not necessarily safe to drink."[7] That is why CDC and EPA recommend testing on a regular schedule, not only when something changes.[4][5]
Step 3: Get a real test
Use a laboratory certified for drinking water. EPA keeps a list of each state's laboratory certification program,[8] and EPA says your local health department may provide private well testing for free.[5] Our guide How to test your well water walks through what to order and when.
State rules and programs differ: some states require testing when a well is built or a home is sold, and some offer no-cost testing. See well water testing by state for Pennsylvania, New Jersey, North Carolina and Wisconsin.
Step 4: Read the numbers
Results come in mg/L, ppm, ppb or grains per gallon, and each contaminant is compared with either a health-based federal limit (a maximum contaminant level, or MCL) or a non-enforceable "secondary" guideline for taste, color and staining.[9][7] See How to read your water test results for conversions and a table of EPA values.
Have a lab report in hand? Enter your numbers in our free water test results checker. It compares each one with the matching EPA value, links the source and suggests the next step. It runs in your browser, so nothing you type is sent anywhere.
Step 5: Match the treatment to the result
- Iron & manganese
Orange or black staining. The right system depends on concentration and form. - Hard water
Scale and soap scum. Not a health issue; softening is a choice. - Coliform bacteria
A warning sign of a contamination pathway. Retest, fix the well, shock-chlorinate, then consider UV. - Nitrate
A particular risk for infants. Boiling does not remove it. - Rotten egg smell
Hydrogen sulfide. Check hot vs. cold first: the water heater is a common cause. - Lead in drinking water
Usually from service lines, solder or fixtures. Check your service line, test at the tap, use a filter certified for lead. Boiling does not remove it.
Guides on arsenic and PFAS are in progress. Until they are published, your state drinking water program or local health department is the best source of advice.
Sources
- NSF Standards for Water Treatment Systems — NSF (accessed November 19, 2026)
- Iron and Manganese in Private Water Systems — Penn State Extension (accessed November 18, 2026)
- Private Drinking Water Wells — U.S. EPA (accessed November 18, 2026)
- Guidelines for Testing Well Water — U.S. CDC (accessed November 19, 2026)
- Protect Your Home's Water — U.S. EPA (accessed November 19, 2026)
- Consumer Confidence Reports (CCR) — U.S. EPA (accessed November 19, 2026)
- Secondary Drinking Water Standards: Guidance for Nuisance Chemicals — U.S. EPA (accessed November 19, 2026)
- Contact Information for Certification Programs and Certified Laboratories for Drinking Water — U.S. EPA (accessed November 19, 2026)
- National Primary Drinking Water Regulations — U.S. EPA (accessed November 19, 2026)