Pennsylvania well water testing guide
Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.
If your home is on a private well in Pennsylvania, testing is your call. The Pennsylvania Department of Environmental Protection (DEP) says plainly that it does not regulate private wells.[1] Penn State's water testing lab notes there are over 1 million private wells in the state serving 3.5 million people, that about half of the private wells tested have at least one water quality problem, and that only half of Pennsylvania wells have ever been tested.[2]
Who oversees private wells in Pennsylvania
- PA DEP does not regulate private wells, but publishes guidance on well contaminants, testing, certified labs and treatment for homeowners.[1]
- Penn State Extension publishes testing and treatment guidance; it notes that testing private water supplies is up to the property owner.[3]
- DEP's laboratory accreditation program accredits the labs you should use for drinking water tests.[4][2]
What to test for
PA DEP's guidance for well owners:[4]
- Test every year for total coliform bacteria, nitrates, total dissolved solids and pH.
- If you suspect other contaminants, test for those too.
- Always use a state-certified laboratory that conducts drinking water tests.
- Because some testing is expensive, spend time identifying potential problems first.
Penn State adds detail based on what's around your home. Its extension service says private supplies should be routinely tested for bacteria, pH and total dissolved solids, and that nearby road deicing, gas stations, septic systems and agriculture call for additional testing. It lists aluminum, chloride, petroleum products, nitrates, pesticides, iron and manganese as common land-use-related pollutants in Pennsylvania.[3]
Arsenic: Penn State Extension says testing for arsenic should be considered, notes its federal and state drinking water standard is 0.01 mg/L, and reports that between 2% and 6% of Pennsylvania private water supplies contain heightened arsenic levels.[3]
Penn State's lab organizes its test packages around the same idea: a standard package (total coliform, E. coli, pH and total dissolved solids), plus add-ons for staining and corrosivity, lead, agriculture/septic (nitrate), mining, gas and oil drilling, and trace metals.[2] For gas or oil drilling baseline testing, the lab recommends an accredited lab that can collect the sample with full chain of custody.[2]
Where to get a test
| Option | What it is | Source |
|---|---|---|
| PA DEP regional and district offices | DEP says bacterial test kits can be purchased from its offices, listed by county on its water testing page. | [4] |
| DEP accredited lab lists | DEP links separate lists of accredited labs for chemical testing and for bacteriological testing. | [5][6] |
| Penn State Agricultural Analytical Services Laboratory | Accredited by PA DEP for drinking water analysis. Kits come from a county Extension office or the lab; the bacteria sample must reach the lab within 30 hours, and it can't accept bacteria samples on a Friday. Its standard package (total coliform, E. coli, pH, TDS) was listed at $60.00 when we checked on November 19, 2026. | [2][3] |
We have not found a statewide free well-testing program on PA DEP's or Penn State's pages. Ask your county Extension office or local health department whether a local testing clinic is running.
Reading your results
PA DEP points well owners to Pennsylvania's maximum contaminant level chart, which lists the levels the state's regulated public water systems can't exceed, and says that if your results are higher than those MCLs you should install a treatment device for that specific contaminant.[4] You can compare your numbers with EPA values in our free results checker, then read the matching guide:
- Bacteria: Coliform bacteria in well water: what a positive test means and what to do
- Staining: Iron and manganese in well water: test, then match the filter
- Nitrate (agriculture, septic): Nitrate in well water: what the number means and what removes it
- Rotten egg odor: Rotten egg smell in well water: find the source, then match the fix
- Scale: Hard water: test your hardness, then decide if you need a softener
For any result over a health-based limit, contact your local health department or the EPA Safe Drinking Water Hotline at (800) 426-4791.[7]
Frequently asked questions
Does Pennsylvania regulate private wells?
No. The Pennsylvania Department of Environmental Protection (DEP) says it does not regulate private wells. Testing and treatment are up to the owner.
How often should I test my well in Pennsylvania?
PA DEP recommends testing every year for total coliform bacteria, nitrates, total dissolved solids and pH. Penn State's lab suggests coliform bacteria annually and pH and total dissolved solids every three years, with more testing if you have nearby land-use concerns or staining, taste or odor problems.
Can I get a well test kit from DEP?
PA DEP says bacterial test kits can be purchased from its regional and district offices, which it lists by county on its water testing page.
Sources
- Private Water Wells — Pennsylvania Department of Environmental Protection (accessed November 19, 2026)
- Drinking Water Testing, Agricultural Analytical Services Laboratory — Penn State College of Agricultural Sciences (accessed November 19, 2026)
- Testing and Interpreting Results for Residential Water — Penn State Extension (accessed November 19, 2026)
- Private Wells: Water Testing — Pennsylvania Department of Environmental Protection (accessed November 19, 2026)
- Drinking water laboratory accreditation report: chemical testing (PDF) — Pennsylvania Department of Environmental Protection (accessed November 19, 2026)
- Drinking water laboratory accreditation report: bacteriological testing (PDF) — Pennsylvania Department of Environmental Protection (accessed November 19, 2026)
- Guidelines for Testing Well Water — U.S. CDC (accessed November 19, 2026)