Test Then Filter

North Carolina well water testing guide

By Test Then Filter editorial team · Last reviewed · 3 sources

Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.

North Carolina handles private wells through county health departments. State law makes the local health department the authority for permitting, inspecting and testing private drinking water wells,[1] and every newly constructed well must be tested before it becomes a drinking water source.[2] After that, as the state health department puts it, it is up to you as the owner to test your water.[2]

Who oversees private wells

New wells: required testing

Within 30 days after it issues a certificate of completion for a newly constructed private drinking water well, the local health department must test the water or make sure a certified laboratory samples and tests it.[1] The law lists the parameters:[1]

arsenic, barium, cadmium, chromium, copper, fluoride, lead, iron, magnesium, manganese, mercury, nitrates, nitrites, selenium, silver, sodium, zinc, pH, and bacterial indicators.

The health department must give the results to the well owner and, where practicable, to any tenant at the time of sampling, along with information on the scope of required and optional testing.[1]

Existing wells: how often to test

NCDHHS testing recommendations for private wells
How oftenTest for
Every yearTotal and fecal coliform bacteria; also check the wellhead for cracks or openings
Every two yearsHeavy metals, nitrates, nitrites, lead and copper
Every five yearsPesticides and volatile organic compounds (yearly if a particular pesticide is applied in your area)

Source: NCDHHS.[2] NCDHHS also says to test after repairs or replacement of well parts and after flooding, if there are known problems in your area, or if the water's taste, color or odor changes.[2] If you are pregnant or have an infant at home, it recommends testing for nitrates, and says not to drink the water or use it for baby formula if nitrates are present; boiling does not remove nitrates.[2]

NCDHHS notes that many wells in North Carolina have too much lead, arsenic, iron, manganese, low pH and harmful bacteria.[2]

Where to get a test

Procedures, fees and ordinances vary from county to county, so call your county's Environmental Health program first.[2]

Reading your results

Compare your numbers with EPA values in the free results checker, then see Coliform bacteria in well water: what a positive test means and what to do, Nitrate in well water: what the number means and what removes it, Iron and manganese in well water: test, then match the filter or How to read your water test results. For any result over a health-based limit, your local health department is the right first call, or the EPA Safe Drinking Water Hotline at (800) 426-4791.[3]

Frequently asked questions

Is well water testing required in North Carolina?

For new wells, yes. State law requires the local health department to test, or ensure a certified lab tests, a newly constructed private drinking water well within 30 days after it issues the certificate of completion. Testing an existing well is up to the owner.

How often should I test an existing well in North Carolina?

NCDHHS recommends total and fecal coliform bacteria every year; heavy metals, nitrates, nitrites, lead and copper every two years; and pesticides and VOCs every five years (yearly if a particular pesticide is applied in your area).

Where do I get my well tested in North Carolina?

Through the North Carolina State Laboratory of Public Health (scheduled through your local health department) or a state-certified commercial lab. NCDHHS says procedures, fees and ordinances vary by county.

Sources

  1. G.S. 87-97: Permitting and testing of private drinking water wells — North Carolina General Assembly (accessed November 19, 2026)
  2. Private Wells: Frequently Asked Questions about Testing — North Carolina Department of Health and Human Services, Division of Public Health (accessed November 19, 2026)
  3. Guidelines for Testing Well Water — U.S. CDC (accessed November 19, 2026)